With the continuous development of society, factories are also more and more, and different plant characteristics require different raw material requirements, then this needs to be applied to meet the different requirements of the feeding system, while the central feeding system can be based on the actual The need to design a financially sound program. And it can also minimize the pollution of raw materials and dust to the injection molding production. So what is the working principle of the central feeding system? From the above, we know why the injection molding shop chose the central feeding system. Today By Xiaobian to introduce the working principle of the central feed system.
Central feed system works:
1, the central feeding system is designed for the production of plastic injection molding workshop products, to achieve continuous unmanned continuous forming operations. The principle of the central feed system is to use vacuum transfer and to transfer the plastic material from the storage tank to the central dehumidification drying system through a centralized piping system and to deliver the dried material to each injection molding machine.
2, the central feeding system through the use of the central dehumidification drying system, can be used after the dehumidifying drying cycle delivery line will be cleaned to ensure that there is no residual pellets in the pipeline to prevent the resurgence of raw materials, but also ensure the injection molding Machine performance of the raw materials in the same vacuum under the action of raw materials in the original dust through the dust filter system is filtered out to help improve the quality of molded products.
3, the central feeding system to ensure the entire system is stable, no plastic resurgence, plugging phenomenon. It is used with a central dryer (dehumidifier) system to allow the drying air to re-dry the feedstock and to clean the delivery pipe after each delivery cycle to ensure there is no residual material in the pipe.